Uniwide Technologies UniServer 1522 Guide de l'utilisateur Page 59

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 102
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 58
56
5. Software & Utilities
5.1 NVRAID
5.1.1 Basic Configuration Instruction
The following are the basic steps for configuring NVRAID
5.1.1.1 Non-Bootable RAID Array
Choose the hard disks that are to be RAID enabled in the system BIOS.
Specify the RAID level, either Mirroring (RAID 1), Striping (RAID 0), Striping and
Mirroring (RAID 0+1), or Spanning (JBOD) and create the desired RAID array.
Install the operating system on one hard disk, then reboot the system.
Run the Windows nForce Setup application and install the RAID driver.
Initialize the NVRAID Array.
5.1.1.2 Bootable RAID Array
Choose the hard disks that are to be RAID enabled in the system BIOS.
Specify the RAID level, either Mirroring (RAID 1), Striping (RAID 0), Striping and
Mirroring (RAID 0+1), or Spanning (JBOD) and create the desired RAID array.
Boot from the Windows CD, then press F6 when the Windows Setup appears.
Initialize the NVRAID Array.
Initialize the NVRAID Array.
Vue de la page 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 101 102

Commentaires sur ces manuels

Pas de commentaire